Ashley
----- Original Message -----
From: "Tom Uban" <uban(a)ubanproductions.com>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk(a)classiccmp.org>rg>; "General Discussion: On-Topic and Off-Topic
Posts"
<cctalk(a)classiccmp.org>
Sent: Wednesday, May 05, 2004 3:16 PM
Subject: Re: DEC RL01/02, RK05/06/07 Cartridge Inspector/Cleaner
At 03:06 PM 5/5/2004 -0400, Ashley Carder wrote:
Does anyone know anything about this
"Inspector / Cleaner"?
The inspector cleaner allows you to hold the raw platter and to
examine and clean it safely.
I've also seen mention of an "alignment
pack" for RK05 drives.
Does anyone here have experience maintaining / aligning RK05 drives and
keeping them running?
In order to properly align an RK05 you need an alignment pack
which has special "data" written at special locations. That
together with a two channel o-scope, the manual and a few basic
tools will allow you to adjust the in/out position of each head.
The biggest problems with maintaining RK05s is that the foam
which is used at various locations in the drive, including in
the air path, disintegrates and turns to dust and/or goo. If
you carefully clean out all of the old foam/dust/goo, you can
fairly easily replace it with new foam purchased from a fabric
store (or similar). A more difficult problem is that the molded
plastic/rubber tube which ducts the air into the disk area also
disintegrates over time. I haven't had to come up with a solution
for this problem yet...
--tom
>Ashley
>
>----- Original Message -----
>From: "Joe R." <rigdonj(a)cfl.rr.com>
>To: <cctalk(a)classiccmp.org>
>Sent: Wednesday, May 05, 2004 11:34 AM
>Subject: DEC RL01/02, RK05/06/07 Cartridge Inspector/Cleaner
>
>
> > Any of you that are interested in the old DEC disk drive systems
should
> > > take a look at this
> > > <http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=4129402394>
> > >
> > > Joe
>