Speaking of AUI and hubs etc., any interest in a 10baseT hub with an AUI port?
Allied Telesyn/CentreCom MR820T
or
IBM 8222-016 (AUI _and_ 10base-2)
?
m
----- Original Message -----
From: "systems_glitch via cctalk" <cctalk at classiccmp.org>
To: "Cameron Kaiser" <spectre at floodgap.com>; "CCTalk"
<cctalk at classiccmp.org>
Sent: Friday, August 31, 2018 6:01 PM
Subject: Re: Thicknet/10base5 Test Segment: The Cable is In!
Yeah, Allied Telesyn/Telesis made (and still makes!)
really decent hardware
at a midrange price. I often recommend their gigabit and PoE switches for
cost-sensitive projects, especially where management isn't really needed.
Thanks,
Jonathan
On Fri, Aug 31, 2018 at 5:56 PM Cameron Kaiser via cctalk <
cctalk at classiccmp.org> wrote:
> > Allied Telesis made a "multi port tap" that provided four AUI ports
off a
> > single Ethernet tap. I don't know if it was a repeater/hub inside, or
> what.
> > It was much smaller than a DELNI or DEREP.
>
> Pretty sure I know the device you're talking about and I think it was
> a hub internally. I liked it a lot better than the DELNI.
>
> Come to think of it, I liked most of Allied Telesyn's stuff. I still have
> a 10Mbit hub of theirs handling the low speed systems and the 10b2 segment
> going to the HP 9000, and a whole mess of the transceivers which are
> periodically useful on AUI-only systems.
>
> --
> ------------------------------------ personal:
>
http://www.cameronkaiser.com/ --
> Cameron Kaiser * Floodgap Systems *
www.floodgap.com *
> ckaiser at
floodgap.com
> -- #include <std_disclaimer.h>
> ------------------------------------------------
>