22 Jul
2016
22 Jul
'16
10:23 a.m.
There are a couple of locking tabs on the sides in the back corner.
You poke at them through the holes in the outer shell. They look
decorative. Two of them are not.
Once you depress one, lift lightly on that back corner and it should
move up 1mm-2mm. Do the other corner and the back of the lid should
tip up towards the front. It has some large plastic tabs on the front
edge that act as a hinge, then it pops off, exposing the innards.
That did the trick! Thanks! I think I never would have found out by
myself...
The drive doesn't seem to work properly.
Either I need to get it working
somehow or replace it with a new (512 byte block capable) drive.
Could be a lot of things, but a new drive would probably solve most
problems. It also depends if the problems are on the SCSI side (won't
respond, is at wrong unit number, etc.) or the optical side (can't
read any media) or in between (can't eject caddy...)
-ethan