31 May
1999
31 May
'99
4:42 p.m.
On Mon, 31 May 1999, Don Maslin wrote:
On Mon, 31 May 1999, Don Maslin wrote:
I did, but it was not what I thought. Turns out that setting STARTUP_P1
"MIN" appears to be the culprit that makes VMS 'forget'. Using
"" instead
seems to restore its memory.
- don
Geez! This is really bad form - commenting on your own message TWICE!!!
I am a little frustrated and sure that I am missing something rather
obvious. However, what must I do to assure that VMS (5.5) recognizes
my RX33 floppy drive, DUA2, on bootup without having to run SYSGEN and
Autoconfigure All each time. The machine tries to boot from it if it has
a disk installed and then switches to the RD54 DUA0 to go on to boot.
I think I just solved my own problem. Running SYSGEN and Autoconfigure
followed by AUTOGEN seems to have made VMS 'remember'! That's good news.