8 Apr
2000
8 Apr
'00
5:03 p.m.
----- Original Message -----
From: allisonp <allisonp(a)world.std.com>
To: <classiccmp(a)classiccmp.org>
Sent: Saturday, April 08, 2000 10:05 PM
Subject: Re: no chars on uVAX console
Allison wrote:
<snip>
the
Het boards were arranged as follows
slot 1 AB/CD >slot 1 ----------------M 7606------------------
slot 2 AB/CD >slot 2 ----------------M 7609------------------
slot 3 AB/CD >slot 3 ----------------M 7609------------------
slot 4/5 AB/AB >slot 4 -----M7516-------- (empty)
slot 7/6 AB/AB >slot 5 -----M7555-------- ------M7546------
slot 8/9 AB/AB >slot 6 (empty) ---Dilog sq703a---
This was the smaller BA23? if so then the slot next to the m7516 is the
bus grant break
and the slot 6 empty is a bus grant break. Notice my margin comments. odd ordering of
slots 4-9 indicate direction of bus grant for Interrupts and DMA.
<snip>
slot 1 AB/CD >slot 1 ----------------M 7606------------------
slot 2 AB/CD >slot 2 ----------------M 7609------------------
slot 3 AB/CD >slot 3 ----------------M 7609------------------
slot 4/5 AB/AB >slot 4 -----M7516-------- ------m7546------
slot 7/6 AB/AB >slot 5 -----M7555-------- ------sq703A------
slot 8/9 AB/AB >slot 6 (empty) (empty)
Allison
I Thought on the BA123-bus the first 4 quad slots had an AB/CD
configuration
but I'll try this one.
Thanx
Sipke