HP 98xx manuals (3rd box+)

Ok that box wasn't quite full so I'm adding these loose manuals: 6) HP Series 200 Computers 9888A Bus Expander Installation and Service. 7) HP 98644A Asynchronous Serial interface Refeence Manual. 8) HP 98620 Direct Memroy Access Controller Installation Note. 9) HP 98625B HP-IB High Speed Disc Interface Hardware Reference Manual 10) HP 98622A GPIO Interface Installation. 11) HP 82906A Printer Owner's manual. 12) HP 98626A RS-232 Interface Installation. Joe Al & et al, OK, Third box! 1) HPL Operating Manual contains HPL Operating Manual and Programming Update for the HP 9826 and 9836 Computers, HP 9000 Series Computers Model 216/226/236 HPL Operating Manual, portions of a HP 3060 manual (the 3060 is a board test system that used a derivative of HPL called BTL (Board Test Language)), HPL Condensed Reference (photocopy) and HPL Operating Manual and Programming Update for the HP 9826 Computer (photocopy). 2) BASIC 3.0 Interfacing Techniques 3) Configuration Reference Manual includes two different Memory Configuration Wheels (maybe you can take them apart and scan everything then people can print it all out and make their own), Infotek Systems AM Series Memory Baord Instation and User's Manual, HP A1401A DIO-I Slot Upgrade Installation Guide, HP 9000 Series 300 Computer Systems Pricing Information (Oct 1988), HP 9000 Series 300 Models 310 and 320 Hardware Technical Data (Sept 1986), HP 9000 Series 300 Computers Configuration Reference Manual and several Installation Notes for HP memory cards. 4) Service Manual includes HP 98270F Powerfail Option Installation for the HP 9826 and 9836 Computers, HP 9000 Series 200 Computers Model 226/236 Service Manual. 5) BASIC Utilities Library for the HP Series 200 Computers includes some interesting Installation Notes and Programming Notes in the back including one on setting up the BASIC ROM card, also a brochure on the HP Series 200 Software available from HP. These are all in full size (8 1/2" x 11") three ring HP binders. Had enough yet Al? Or should I keep going? :-) Joe Previous I found another handy sized box so I packed up some more books. This lot includes: 1) Peripheral Installation Guide, HP 9000 Series 200/300 Computers & 35731 HP Monochrome Monitor Installation Guide 2) Using the BASIC 5.0/5.1 System, HP 9000 Series 200/300 Computers 3) FSD CE Handbook including Model 226/236 Installation Guide & Models 26 and 36 CE Handbook & Model 220 Installation Guide & Installation Notes for various cards 4) Pascal 3.0 User's Guide 5) Installation Reference HP 9000 Series 300 Computers Model 375 & BootROM Configuration Mode User's Manual, HP 9000 Products & Use with Terminals and Monitors, Series 300 Computers 6) BASIC Language Reference Volume 2: O-Z, HP 9000 Series 200/300 These are also "short" manuals in three ring binders. BTW I have some HP-UX manuals but some of them are paperback bound. Can you scan them without damaging them? These should also get into today mail. If I can find more boxs, I'll pack more books. Joe Previous Al, OK I'm packing up a box of HP books for you. I'm including: 1) Using HP BASIC for Instrument Control, a Self-Stufy Course 2) BASIC 5.0/5.1 Graphics Techniques 3) Installing, Using and Maintaining the BASIC 5.0 System 4) Pascal 3.1 User's Guide 5) Installation Guide HP 9000 Series 200 Model 226 and Model 236. 6) BASIC 5.0 Interfacing Techniques, Volume 1: General Topics These are all in the grey HP three ring binders and are all short (roughly 8" x 8 1/2") books. These cover a variety of topics and should make a good start. I specificly included the Installation book (#3) since it contains the information that Tony needs. It's probably the starting point for everything esle but it's actually a very difficult book to find and the reference manuals and such don't cover such basic topics as how to boot the machines or how to create or save the operating system. I'll probably ship this box today via USPS Media mail. I'll also go ahead and start packing some more books. Joe At 05:05 PM 7/24/05 -0700, you wrote: