Plastic Repair

I should add that as I did, test in an inconspicuous place first. ++++++++++ Kevin Parker ++++++++++ -----Original Message----- From: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Kevin Parker Sent: Wednesday, 28 November 2012 7:48 PM To: 'General Discussion: On-Topic and Off-Topic Posts' Subject: RE: Plastic Repair I had a similar problem with an old case from the 70's so I went to the local hobby shop first (as I suspect that a hardware store would sell me something more general) - after all hobby shops are the plastic experts - they sold me this. Fantastic and has heaps of other uses - I even used it to repair the broken support on a monitor - it was cast aluminium. http://www.rapidfixaustralia.com.au/about-rapidfix.html ++++++++++ Kevin Parker ++++++++++ -----Original Message----- From: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org] On Behalf Of David Coolbear Sent: Wednesday, 28 November 2012 6:10 AM To: cctech at classiccmp.org Subject: Plastic Repair Call me odd, but my absolute, top favorite computer is my MicroVAX in a BA123 chassis. If the house were burning, that would be the one computer I would try to retrieve. Sadly, last night, the daughter snapped the corner off the louvers on the top left of the chassis. Unless some kind sole has a replacement part, I plan on gluing the pieces back on. My question is, cyanoacrylate or epoxy?