23 Aug
2013
23 Aug
'13
4:02 p.m.
At 06:04 PM 8/22/2013, Robert Jarratt wrote:
I have a DEQNA cabinet kit that does not work. I know
this because if I
replace it with another one the activity light on the switch works and
I am
able to see MOP requests coming from the machine to my boot node, with the
faulty one none of this happens.
Now, I have tested the fuse and I have tested the connectivity of
every wire
from the internal connector that connects to the DEQNA board (also tried
with a DELQA by the way) to the AUI connector on the outside of the
cabinet
kit. Everything seems to be OK. But it doesn't work. I have tried
"jiggling"
the wires a bit while testing the continuity of the wires, but it still
seems OK.
What other failures could there be?
Have you verified that someone hasn't mixed up the pins on the Berg
header that plugs in to the board?
Other than a blown fuse, that's about all that can go wrong with these
- some kind of mechanical problem.
-Rick