8 May
2006
8 May
'06
12:56 p.m.
At 01:11 AM 5/5/2006, Scott Quinn wrote:
Replaced the tantalum cap in the VME terminator
paddle boards on
the ComputerVision, fired it up, and I'm getting
chasing lights on the diag panel. It does it with all cards, and
with only the CPU. Looking at the behavior of a
Sun 3/110, it looks like maybe the power-on reset circuit is flakey
(3/110 chases once and then goes into selftest
patterns, 3004 keeps chasing). Couldn't find this discribed on the
Sun3 Zoo webpage. Anyone come across it?
Did anything come out of the CPUs serial console port?
If this is the clone of the 3/260 then I have some CV memory boards.
Michael Thompson
E-Mail: M_Thompson at IDS.net