FW: HP2000/Access - benchmarks

At 2004-01-23 11:24 PM, Jay West wrote: Positive. There were two 21MX-E processors in our system. Once or twice we had problems where HP would replace a process with a "loaner" while they checked out a possible hardware problem. On those occasions, they will replace the 21MX-E with a 2100 processor. I don't believe that both processors were replaced, but only one. I can't remember whether the temporary configuration was 21MX-E system processor and 2100 I/O processor, or 2100 I/O processor and 21MX-E processor. I'd love to! In thinking about this a bit, I seem to remember us having an odd problem with the 7920 on the HP 2000, and so the HP CE came in on a Saturday (we didn't run production on our HP 3000 at the time), and he "borrowed" the 7920 from the HP 3000 and put it on the HP 2000 to see if it would exhibit the same problem. As Ed Sharpe mentioned, SLUTH was for the HP 3000, and what I probably remember was the CE using SLUTH to format the HP 3000's 7920 when he was done with the HP 2000 testing. The first few months we had our HP 2000 ACCESS we had a variety of strange hardware problems, but by the time the system was 6 or so months old, HP had found and fixed all the problems. John *** When replying to this message, please do not delete these *** *** signature lines. Otakon Katsucon HP3000-L @classiccmp.org ***