There will be some limit, but I'm not sure what it
is. More than 20MB,
for sure. Might be 500MB, maybe less. I know that stacking filestores
use the same code, and I know that although the largest ones sold and
supported by Acorn were 60MB, they had bigger in-house.
Julese Richardson seems to think there'll be a problem with the fact that
the Filestore will want a deive that suports 256 byte sectors.
Of course with ST506/412 you're probably OK - the Adaptec board probably
supports various sector sizes (and of course the drive is non-intelligent and
Well, it's obvious that ADFS supports the Adaptec board + ST412 drive --
that's what was in the original Acron winchester box (which, IIRC, hung
off a Beeb), and what is used in the ACW.
However, from what I can tell, the Filestore mever supported this (I
don't know if it would work or not, I suspect not). The first Filestore
hard disk unit -- the E20 -- was the same host adapter linked to a SCSI
winchester.
I suspect the Adaptec board supports 256 byte sectors.
>> The
chap who sold this to me included a couple of such Sony
>> drives, alas missing the front panels and eject buttons.
I'm sure I can rustle up a pair of suitable drives through the museum if you
Oh, I have plenty (?) of 3.5" drives (and I suspect even modern 1.44M
ones could be made to work in 720K mode). But I'd rather like to install
the original type of drive if possible. Hence my other post asking for
scrap Sony drive bits.
-tony