VAX/VMS Assistance Requested

A little explanation here. I have a MicroVax II with 9 megs, an RD54, 16 serial ports, a TK50 and controller, a TSV05 and a streaming tape drive that goes with it. I do not have an RX50, although I've considered whether I should pull one out of a DecMate III I have and put it in the MicroVax. I have a dialup connection through my office, which goes into the back of a Livingston PM-11, which is a 10 port serial terminal server. The Vax is connected to another port and I can set it up so that if I telnet to a specific port on the terminal server, I go into the serial port on the Vax instead. That works if I twiddle a bit with set term/modem and set term/hangup a bit. Just for sake of description, I'm using a Mac SE running System 7.0.1 as a console to the Vax. =-) If anyone would like to see the VMS prompt, for no apparent reason, telnet to 208.141.153.33 port 6001. Hit return and VMS will ask you to login. Unless I happened to be logged in through the terminal server at the time. =-) I do not have a qbus ethernet board. Someone on the list had them for $50 but I'm wretchedly poor so I make due with serial connections to my freebie machines. It's running VMS5.3-1. But that just gave me an idea. Someone on the list said they were doing Decnet with a Linux box. I spend ALL my time every day hacking on Linux boxes and have several at home. Hmmm...I'll have to dig back through the list postings! =-) At any rate, if anyone can send me kermit on a TK50 I'd be happy to cover costs or send the TK50 cart back when I'm done. Anthony Clifton, kc0cue