6 Nov
2009
6 Nov
'09
2:16 p.m.
How are you getting around the 8meg max drive size common with CPM ?
Are you splitting it into many small drives in hardware on in the driver
like Morows dod for the M26 ?
I have an old MPM system that had an M26 on it I would like to bring back to life.
The other Bob
On Fri, 6 Nov 2009 16:42:28 -0500, Andrew Lynch wrote:
Hi! My good friend John and I are working on a joint
www.S100Computers.com &
N8VEM <http://groups.google.com/group/n8vem> S-100 IDE project. It is based
on the following design by Peter Faasse.
John built a working prototype and some software and I
am making a PCB. The
PCB is in trace route optimizing phase now. I can't say exactly when a PCB
will be available but if you think you might be interested please let me
know. PCBs will probably cost *about* $22 give or take some plus shipping.
If you do want a PCB it is important you tell me beforehand so I can include
it in the manufacturing order.
The board will connect to regular IDE devices and
includes mounting areas
and interfaces for laptop (2.5" with the high density 44 pin connector) and
CF adapters. John has his prototype working with a CF adapter mounted on the
PCB and it seems to work fine.
Thanks and have a nice day!
Andrew Lynch