3 Oct
2015
3 Oct
'15
1:20 a.m.
Question: will this kind of hookup work with a USB-SCSI converter? If
so, are there any specific brands and models known to work? I'm
interested in both SE & differential, 50 pin & 68 pin.
Or does it need a traditional Adaptec or similar card?
Preferably under Linux; Windows possible but deprecated.
Mike
On Sat, Oct 3, 2015 at 7:52 PM, John Wilson <wilson at dbit.com> wrote:
On Fri, Oct 02, 2015 at 11:28:49PM -0700, Marc
Verdiell wrote:
--
http://www.corestore.org
'No greater love hath a man than he lay down his life for his brother.
Not for millions, not for glory, not for fame.
For one person, in the dark, where no one will ever know or see.'
Thanks for your STP2T02.exe SCSI tape to SIMH
program. Ran like a champ
under Win98 DOS, first time. It's the only utility that did work out of the
box to read a tape from my SCSI-1 HP 88780 9-track into a SIMH file, out of
the 5 or so I tried. Before I jump to Linux, which seems to be the more
straightforward option, does anyone have the reverse tool to write a SIMH
image file on a 9 Track tape under Windows/DOS? None of the utilities I
found using Windows Tape APIs could deal with my tape SCSI-1 early
interface, they all expect some basic (SCSI-2?) functions that are not
implemented.
My "ST.EXE" program (available from http://www.dbit.com/pub/ibmpc/util/
including source) runs on real DOS (not Windows) and can write from an
E11-format .TAP file (which SIMH uses a garbled version of, but they're
interchangeable for *even* record lengths which are 99% of the universe)
to a real tape. It works on my HP 88780, and my Qualstar 1260S and even
a DEC TZ30 or TK50Z-GA (which aren't quite full SCSI-1). Not picky at all.
"st wput foo.tap" should write your image out. You need a DOS ASPI driver
for your SCSI card, and you'll need to use something like "-f scsi5:" on
the command line (or set the TAPE environment variable) so ST will know
which SCSI ID (etc.) to use.
John Wilson
D Bit