Need DRAM chips

The chips on the mainboard are probably different in that they are a smaller profile but here's what they have on them: .. KOREA ... 326Y ... KM44C256J-6 .. There are 4 of them soldered to the board, and they give the S3 section 512K RAM with 256 color capability. The soldered chips are 20 pin but each side has two sets of 5 pins with a space between them unlike the bare sockets that are a symmetrical 10 on each side and longer than the soldered on ones. 4 chips are supposed to brig it to 1mb and allow more color and (I hope) higher resolution without a color loss). It's a 1993 486DX2-66 server so that might give you an idea. I know it's not quite a classic (10 yr old) yet but it's close enough and I know the people here know more than most in the chip level stuff. I have no idea what the symbol made up of dots is, I've been out of the component level field too long and my "memory banks" are toast right now after a couple beers (been landscaping in the hot sun all day and it's time to relax) -> -----Original Message----- -> From: owner-classiccmp(a)classiccmp.org -> [mailto:owner-classiccmp@classiccmp.org]On Behalf Of jpero(a)sympatico.ca -> Sent: Saturday, July 07, 2001 7:16 PM -> To: classiccmp(a)classiccmp.org -> Subject: Re: Need DRAM chips -> -> -> > From: "Russ Blakeman" <rhblake(a)bigfoot.com> -> > To: "Classic computers message group" -> <classiccmp(a)classiccmp.org> -> > Subject: Need DRAM chips -> > Date: Sat, 7 Jul 2001 22:54:16 -0500 -> > Importance: Normal -> > Reply-to: classiccmp(a)classiccmp.org -> -> > In search of 4 DRAM chips for video expansion on built-in S3 -> card. The ones -> > in it are 44C256 at 60 ns and the 4 empty DIP sockets are 20 -> pin (10 pins -> > each side). Anyone have 4 in their stash and want to part with -> them - and if -> > so how much? -> > -> -> Carefully!! What brand of this memory chips with this 44C256? -> There were dual ported versions, 256K x 16bit, EDO or FPM, some tad -> different in specs. -> -> Cheers, -> -> Wizard