18 Sep
2009
18 Sep
'09
6:07 p.m.
On Fri, Sep 18, 2009 at 8:00 PM, Jim Brain <brain at jbrain.com> wrote:
Is there any way you could send me the gerbers as a
couple of ZIP files?
?I'd be happy to ask my board house to quote the boards and see if they can
do a better price.
Hi, Jim,
I'm working on an AT89S51 design with a friend (he teaches electronics
and he wants a training board that can drive LEDs and relays, so I'm
helping him with something out of EagleCAD). Is your board house good
for a short run of a 3"x4" 2-sided board, no exceptional design rules?
I'm thinking sample quantities for a first go - somewhere from 1 to 4
or 5 boards, depending on cost. Oh... it's all through-hole, no SMT
(89S51 in PLCC socket, ULN2001, 74HC541, 1/4W resistors, 7805 PSU,
74HC14 for 60Hz tick from AC input...)
If your board house is better at larger runs than protoytpe runs, I'd
appreciate any recommendation on a proto house. I haven't ordered any
PCBs in over 5 years, so I'm out of touch on places right now.
Thanks,
-ethan