2 May
2006
2 May
'06
7:30 a.m.
Yup, I am not staring at $500 or $700 (way too much),
and I am not counting to make big bucks here.
I will have a good look at it this evening, scan the
doc (if I have it) tomorrow and then put it up on
eBay for, say $25 ...!
- Henk.
-----Original Message-----
From: cctalk-bounces at classiccmp.org
[mailto:cctalk-bounces at classiccmp.org] On Behalf Of dwight elvey
Sent: dinsdag 2 mei 2006 16:24
To: cctalk at classiccmp.org
Subject: RE: uScope 820
Hi
The 499 one is on its second round, after not being sold for 499.
It is not likely that the 700 one will get much either. It
seems like I saw one of these get around 300 or so. Remember,
these are just asking prices.
These were designed to work with the 8080 but as I recall,
they were also used with a few others, like the 8085. When I
worked at Intel, I'd gotten a centronics printer wired for
220 50 cycle. I used the transformer from one of these to use
to step down. I handled the 50 cycle with a gear change on
the AC motor.
Dwight
This message and attachment(s) are intended solely for the use of the addressee and may
contain information that is privileged, confidential or otherwise exempt from disclosure
under applicable law.
If you are not the intended recipient or agent thereof responsible for delivering this
message to the intended recipient, you are hereby notified that any dissemination,
distribution, or copying of this communication is strictly prohibited.
If you have received this communication in error, please notify the sender immediately by
telephone and with a "reply" message.
Thank you for your cooperation.
From: "Gooijen, Henk" <henk.gooijen
at oce.com>
Wow, $500 and $700 for that thing? I have one at
home with the
documentation, and I am sure never going to use it.
Guess putting it on eBay will make some money to finance the
PDP-11 stuff which is far more interesting than Intel *&@#~$% I will
check bitsavers if the doc is available, else I will scan that first.
- Henk.
> On 5/1/06, Don Y <dgy at dakotacom.net> wrote:
> > Hi,
> >
> > Can anyone verify that this box (1976 vintage) also handles
> 8080's?
> > I'm *sure* I had an 8080 "personality module" for mine
but I can't
> > > seem to find it (nor the overlay or the pod).
> > >
> >
> > FWIW, these two uScope items are both pictured with 8080A probes.
> >
> > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=8802128045
> > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5227203002
> >