hp 10391b inverse assembler

Hi George My Name is Glen Graham I am also looking for a copy of 10391B Inverse Assembler Files Did you ever do any good finding a copy? I you did can you please pass on the information. I have included a copy of files that you may be interested in Operating system files for 2/ HP1650B 3/ HP1660A 4/ HP16500B 5/ HP16500C 6/ LIF Utility Software (very handy) use this program in DOS to convert the files into LIF format This is the format that the equipment uses except the 16500B/C units they use DOS files To load software into 16500B/C use these instructions Double-click the executable file and unzip the contents to a folder on your hard drive. 1. You will need five blank floppy disks to complete this step. Label the floppies 1, 2, 3, 4, and PVTEST. In Windows Explorer, copy the contents of the DISK1 folder to the disk labeled 1. Repeat for the remaining folders. Note that it is not necessary to copy the DEMO folder in the 16500C file set to the 16500C for proper operation. 2. Boot your 16500B/C from Disk 1 (insert the disk into the floppy drive and turn on the power). 3. Copy all the files from Disk 1 and the rest of the disks you created into the logic analyzer's \SYSTEM directory. To do this, start in the System window, click Configuration, and select Flexible Disk. Then enter the command Copy file: *.* type: DOS to: \SYSTEM on: Hard Disk and click Execute. Click Continue if you are prompted to overwrite any files. 4. Remove the last floppy disk from the drive and cycle power on the 16500B/C. The analyzer will now boot from the new operating system files you just copied.