If I use "blah" Notepad to open a text file at the default font size of 10pt
I see 106 lines of text. This is slightly less than one might calculate
because you need to subtract the taskbard,frames and other things...
This is being displayed in a physical vertical area of just over 10.5
inches, to the text is being displayed nearly ACTUAL SIZE. Holding up a
piece of printed paper I get about 4 lines of drift over the vertical
distance.
Considering that most printed material [eg. Paperback books and newspapers]
will use a smaller font...I don't see why ther is any surprise about working
at this resolution.....
>> -----Original Message-----
>> From: cctalk-bounces(a)classiccmp.org
>> [mailto:cctalk-bounces@classiccmp.org] On Behalf Of Patrick Finnegan
>> Sent: Tuesday, August 17, 2004 3:40 PM
>> To: General Discussion: On-Topic and Off-Topic Posts
>> Subject: Re: <Silly> RE: Help with question about web page access
>>
>> On Tuesday 17 August 2004 14:33, David V. Corbin wrote:
>> > 2048x1536 (with is 4 1024x768 areas on the same glass) is
>> what I use
>> > on some of my 21"/22" monitors.
>>
>> Ick. I don't do anything higher than about 1280x1024 on a
>> 20" monitor, and I usually am sitting no more than 16" back
>> from it. At 1600x1200, even on "good" monitors, I can't
>> see things anymore. My rule of thumb is you should be able
>> to see the individual dots in a grid of 1x1 pixel dots (but
>> they shouldn't be too big).
>>
>> > 1600x1200 [not 1280 which you may be confusing with
>> 1280x1204] is what
>> > I run on my 17" screens.
>>
>> You must have 20-10 vision or something, because no human
>> should be able to see 1x1 pixel dots on something with that
>> high of DPI.
>>
>> Pat
>> --
>> Purdue University ITAP/RCS ---
>>
http://www.itap.purdue.edu/rcs/
>> The Computer Refuge ---
http://computer-refuge.org