8 May
2018
8 May
'18
6:21 a.m.
Another quick thought,
Putty ( https://www.putty.org/ )
has serial mode, and an AnswerBack for ENQ (Control-E).
You could try using that, although HPterm escape sequences will not work.
Keven Miller
----- Original Message -----
From: "Mike Loewen via cctalk" <cctalk at classiccmp.org>
To: <cctalk at classiccmp.org>
Sent: Mon 07 May 2018 09:36 PM
Subject: HP 3000/37 console
Does anyone know if a non-HP terminal will work as the console for a HP
3000 Series 37? The power-on self-test uses ENQ/ACK to speed sense, but
the manual also implies that it will sense speed from a <CR>. On my 37,
the TIC self-test passes up to the point where it talks to the terminal,
but fails to to speed sense.
Mike Loewen mloewen at cpumagic.scol.pa.us
Old Technology http://q7.neurotica.com/Oldtech/