25 Jun
2018
25 Jun
'18
6:26 a.m.
On Sat, Jun 23, 2018 at 11:06 PM, Glen Slick via cctalk <
cctalk at classiccmp.org> wrote:
On Sat, Jun 23, 2018 at 9:38 AM, Carlo Pisani via
cctalk
<cctalk at classiccmp.org> wrote:
could you upload them to archive.org? Netstation software is somewhat hard
to find these days.
Netstation Software
(x11 terminal) C3253A HP Envizex P-Series
Up for sale is a X-Terminal made by Hewlett Packard in 1995.
Tested, in perfect working conditions!!!
cpu: i960 @ 33Mhz (it's the fastest available on Envizex v1)
ram: 48MB (builtin + 16+16+8, the first two sims need to be equal)
rom: none (sorry, It doesn't have any font-rom, it loads fonts from
tftp/NFS)
vram: 2MB
lan: 10Mbps BASET RJ45 (it also comes with an AUI port on the back)
kb/mouse: common PS/2 (F12 is a special key, but Envizex works on
common keyboards, HIL keyboards are also supported)
Media: floppy 3.5",1.44MB
Software included!
It comes with all the documentation, configuration-scripts, and
startup for Linux (sorry, I don't have HPUXv10.20/v11, I can't
test/adapt scrips).
I also have a C3253A HP Envizex P-Series. I was fortunate to also
acquire a PCMCIA flash card adapter for it and was able to get it set
up to boot from a PCMCIA linear flash card. I don't have the optional
floppy drive in mine.
I have a set of 3 Netstation software CDs that I got from someone else
on the list a few years ago. I forget if I ever uploaded images of
these CDs somewhere. For the C3253A HP Envizex P-Series you need
Version 7.1
For HP ENVIZEX, ENTRIA and 700/RX
Version 7.1
Supported Hosts: HP/SUN/IBM
Part No. B3651-10117
Netstation Software
For HP ENVIZEX II and ENTRIA II
Version 9.1
Supported Hosts: HP/SUN/IBM
Part No. B3651-10121
Netstation Software
For HP Netstations
Version 7.1/9.1
Supported Hosts: HP-UX 11.0
Part No. B3651-10122