5 Sep
2016
5 Sep
'16
9:29 a.m.
On Sep 5, 2016 12:05 PM, "Peter Coghlan" <cctalk at beyondthepale.ie>
wrote:
I've got a VT102 Video Terminal User Guide (EK-VT102-UG-003) which contains
Fritz Mueller wrote:
>
> > On Sep 4, 2016, at 6:08 PM, william degnan <billdegnan at gmail.com>
wrote:
> >
> > Even better, I found this post, this is my how to attach a vt100 to a
VAX
> > 4000, you can apply to most any case
>
>
> Hi Bill,
>
> Thanks for you help!
>
> I will say that I have the getty running fine, baud rate, serial
format, etc.
> all okay. Works just fine at 1200 baud and
below. At higher baud
rates, it
> seems like the vt100 is dropping some characters
or bits after certain
> escape sequences, even with xon/xoff flow control enabled, so I?m
*pretty*
> sure the issue is just with the padding values in
the vt100 terminfo
spec?
a table of fill characters required for different
control codes / escape
sequences / display characters at each possible baud rate. Here's what it
lists for 19200 baud:
324 IND, LF, NEL, RI (Smooth Scroll)
191 DECCOLM
190 DECALN
144 ED (132 Col)
104 ED (80 Col)
32 IND, LF, NEL, RI (Jump Scroll)
6 EL (132 Col)
4 EL (80 Col)
7 DECINLM
2 All others except RIS and DECTST
The appendix also seems to hint that the VT100 has different requirements
so
this may not be very useful to you but it might give
you a rough idea.
Regards,
Peter Coghlan.
The link I provided has exactly what keystrokes and settings to use for
8/n/1 and 19200, plus a link to the vt100 manual. VT102 is not the same.
B