6 Feb
2003
6 Feb
'03
4:55 a.m.
Hi Al,
Never heard of that particular memory board before, don't know where you
can get a manual. For a HD you can go to www.myatari.com and buy a "ICD
LINK" Adapter which will give your DMA/ASCI port full SCSI capabilities,
also ask them about ExtenDOS Gold, its a drivers disk that will allow the
TOS to recognize and use CD-ROM drives too, they also have a large selection
of ST software on CDROM's
Curt
----- Original Message -----
From: "Al Hartman" <alhartman(a)yahoo.com>
To: <cctalk(a)classiccmp.org>
Sent: Sunday, February 02, 2003 8:09 PM
Subject: Atari ST Help
I have my original Atari ST 512 still...
It's been a trouper and I'd like to use it again..
So, I'm looking for help with the following:
1. It has an AERCO Easie-ST Ram upgrade board in it,
that is no longer recognized. This board will use 1mb
x 8 chips to take the system to 4mb (which is max for
this machine).
I lost my manual, and it isn't working anymore.
I know it's a long shot, but does anyone have the
manual for this, or can point me to where I can get a
RAM upgrade for this old machine?
2. I'd like to throw an 80mb SCSI External drive I
have on it, so I'm looking for a SCSI Adapter for an
ST. $100 + s/h for a new(?) one from one of the
remaining dealers is a bit steep...
Does anyone know of a cheaper source for one, or have
an old Atari Drive with a bad mechanism I can buy to
salvage the adapter?
Regards,
Al Hartman
P.S.: I have a paper tray for an HP IIIp printer (but
not the actual mechanism to use it) if someone is
still looking for one.