10 Nov
2014
10 Nov
'14
10:15 p.m.
Message: 9
Date: Mon, 10 Nov 2014 10:41:03 -0600
From: Chris Elmquist <chrise at pobox.com>
To: "General Discussion: On-Topic Posts" <cctech at classiccmp.org>
Subject: Re: TU58
Message-ID: <20141110164103.GL7672 at n0jcf.net>
Content-Type: text/plain; charset=us-ascii
On Monday (11/10/2014 at 06:25AM -0800), Al Kossow wrote:
I'll guess: no 55134, 3/8" ID x 1/2" OD x 1/16" based on a tip in an
another forum.
I wander if it could be possible to cut in a lathe if its put on a
temporary hub and cooled down with cooling spray.
I'll try to find a seller of this tube on the European side of the ocean.
The one that is refereed to above doesn't seams to ship over seas.
/Anders
On 11/9/14 11:44 PM, Simon Claessen wrote:
What's the correct ID to choose?
I assume you then slip it over the aluminum hub after cleaning all the
old roller residue from it? Do you glue the new tubing to the hub?
Maybe we could get someone to cut proper sized chunks of this tubing
with a laser cutter of some sort so that we have accurate dimensions
with a clean edge?
Chris
--
Chris Elmquist
I have been thinking about making an Arduino
sketch to generate the
blocks for a new tape
Norprine tubing works great as a replacement
http://www.usplastic.com/catalog/item.aspx?itemid=104207&catid=664
The tricky part is cutting it.
Thanks to Brad Parker for telling me about it.