From: "Vintage Computer Festival" <vcf at
siconic.com>
I just found that if I hold down the third typebar from the rear the
correct characters come out. Any ideas what's happening here?
Hi
It isn't clear if you have a reader or printer problem.
Does it work fine from the keyboard in local? If so,
it is most likely in the reader.
If it is the reader, look for a spring that may be disconnected
or a piece of crud inside. Try disconnecting the motor power
and operating by hand. Remember that when going slow, you need
to lockup the clutches by hand by squeezing the two tabs together
or they will drag. With the motor power off, you can turn the
fan and go slow.
Dwight