11 Aug
2006
11 Aug
'06
2:59 p.m.
The bad news is that I have a few more of these cards
but the twisted pair
connector is designed for LattisNet. LattisNet is a precursor to the standard
Ethernet over twisted pair and it is supposed to be close, but my hubs aren't
buying it.
Do you know what the differences are? Does your ethernet card use a
standard chip for the twisted pair connector -- if so, can you trace out
the circuitry round it to see how it differs from a normal 10baseT
design. It might just be the connector pinout or something.
-tony