15 Jun
2014
15 Jun
'14
6:14 p.m.
On Sun, 15 Jun 2014, pdaguytom . wrote:
Right now I thinking I'll try to use a 12531C/D
for terminal. The computer
has what I think was/is a basic rom set with (I'm guessing) stub loaders
for a disk drive (washing machine size) and tape drive, I'll need to do
more research to see if the I/O boards for these drives would be a good
starting point to connect the USB drive emulator or just try another serial
card and interface with it. (and a bootloader to load HP IPL/OS).
On my 2109E (will work with a 2113E) I use a 12966A (BACI) for the
system console. I've used it with both physical terminals (2645A and
2745A), and the QCTerm emulator:
http://www.aics-research.com/qcterm/
I built my 2109E up so it can run RTE-6/VM.
http://sturgeon.css.psu.edu/~mloewen/Oldtech/VCF-East2014/G_IMG_3355.jpg
Mike Loewen mloewen at cpumagic.scol.pa.us
Old Technology http://sturgeon.css.psu.edu/~mloewen/Oldtech/
