1 Jan
2013
1 Jan
'13
noon
Thanks for the correction, Fred! I forgot to add that :(
---
Enviado do meu Motorola PT550
Meu site: http://www.tabalabs.com.br
----- Original Message -----
From: "Fred Cisin" <cisin at xenosoft.com>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
Sent: Tuesday, January 01, 2013 2:43 PM
Subject: Re: Getting an ST-225 disk to work
> That is
something I have been thinking about too. I don't know what the
> connectors used at the drive end are called so I can search for them.
On Tue, 1 Jan 2013, Alexandre Souza - Listas wrote:
IDC female board edge for cable crimp...one
is 20 pin (?) and other
34
pin (it is an old floppy drive cable, same as 5 1/4 floppies)
ALMOST.
IBM used a twist in their hard drive cables for drive select, etc.,
although IT IS NOT THE SAME TWIST AS FLOPPIES.
You CAN use a straight cable if you are willing to set the drive-select
and maybe other jumpers correctly.