1 May
2020
1 May
'20
1:59 p.m.
Agreed. They sure are pressed in, then riveted in for good measure. You?d have to drill
them out first. Not an easy modification.
Marc
On Apr 30, 2020, at 2:18 PM, Al Kossow via cctalk
<cctalk at classiccmp.org> wrote:
?On 4/29/20 10:01 PM, Curious Marc via cctalk wrote:
Or replacing the posts with ones machined from
Teflon or Delrin?
The posts are staked in. You might be able to make tiny rollers to go over the pins
Their working diameter isn't super critical