11 Jul
2011
11 Jul
'11
10:27 p.m.
On Mon, Jul 11, 2011 at 6:07 PM, David Griffith <dgriffi at cs.csubak.edu> wrote:
I need to figure out how to make a wooden frame with
which to hang the whole
thing on the wall.
I found a hunk of suitable wood and used a table saw to cut a 45
degree bevel in the face and a 1/8" notch to hole the plexi. A bit of
measuring and work with a power mitre saw gave me a box frame, then I
cut out access notches for the CF card and IOB6120 cables with a jig
saw, and drilled a large hole to admit the wall wart power connector.
(one of the links I posted back on 9 June)
http://www.flickr.com/photos/chiclassiccomp/5009099653/in/photostream
-ethan