FS: Floppy drive cable for Ampro Series 100

I have available for sale a floppy cable for an Ampro Series 100, which was recently discussed to death. The cable comes with some things attached: Ampro Series 100 computer MOdel 122 Serial # 1202 Case 2 Canon MDD211 drives System appears to be complete and functional, but I have not tried it. It does NOT have a SCSI card - there is a place for connector for that with a block-off. The computer is free to whoever buys the cable. The floppy cable (the object of much discussion) is 14" long. At one end is a MALE dual row header (34 pin) that protrudes through a cutout in the back of the case. 6.5" (approx) from that connector is a FEMALE card edge connector that plugs onto the circuit board. 5.5" from that is another FEMALE card edge on one of the drives. 2" from that is another FEMALE card edge on the other drive. IS THAT enough information? It is currently at my office at Merritt College (Oakland CA hills). If anyone wants it, I will be there tomorrow briefly at 3:00. After that, you would have to wait until January, or pay me to make a separate trip there. -- Grumpy Ol' Fred cisin(a)xenosoft.com NOTE: My ISP is having some problems. If you have difficulty reaching me at this e-mail address, you can leave a message at: fcisin(a)merritt.edu cisin(a)info.sims.berkeley.edu