21 Oct
2006
21 Oct
'06
2:17 p.m.
There are 3 more RL-01 packs that were left behind.
Some of the packs you have (and some left behind) have
the OMSI Pascal compiler for RT-11.
I also found the ribbon cable and bulkhead fixture that
goes between the RL-11 board and the RL drive cables.
----- Original Message -----
From: "Jay West" <jwest at classiccmp.org>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
Sent: Saturday, October 21, 2006 10:57 AM
Subject: Re: dec /34a issue (Solved)
Bob wrote...
Is this the 11/34 from my garage?
Mostly, yes. I acquired three 11/34 carcasses in varying states of
wholeness - yours was by far the most complete. The machine I'm bringing
up now is mostly the one from your garage, but in a different BA11 (the
same front panel however). The leftover parts of the remaining /34 will be
offered to the list or pitched. There's not much leftover though, as I'll
want the regulators in the remaining chassis/panel for spares.
Odd - it boots RT11. It passes some diagnostics. Other diagnostics I can't
tell for sure if it's passing correctly due to lack of documentation on
the diagnostics. I suspect it's failing something though.
Jay