30 Dec
2004
30 Dec
'04
1:37 a.m.
On Dec 30 2004, 9:09, Richard Beaudry wrote:
Hello all,
I have a Powermac 8100/80 that needs a RAM upgrade. Lowendmac.com
says that it can handle 72-pin SIMMs, up to 32MB each. My question
is
this: does it take the same 72-pin SIMMs as a PC, or
does it require
special "mac-only" SIMMs? Google only showed people still selling
the
RAM (for outrageous prices), and I couldn't get
actual specs on the
RAM itself.
Ordinary PC-type 72-pin SIMMs should be fine, but I think you need Fast
Page Mode rather than EDO. You don't need parity, but it will do no
harm if you have 36-bit SIMMs instead of 32-bit. lowendmac mentions
80ns, so 70ns or 60ns will also do. I bought 4 x 32MB SIMMs about 4
weeks ago on eBay for an SGI, which wants FPM+parity and gold contacts;
it was quite cheap (under $20). The same seller had quite a lot that
was non-parity, and he even mentioned Apples.
--
Pete Peter Turnbull
Network Manager
University of York