4 Mar
2010
4 Mar
'10
2:25 a.m.
-----Oorspronkelijk bericht-----
Van: cctalk-bounces at classiccmp.org
[mailto:cctalk-bounces at classiccmp.org] Namens Brian Lanning
Verzonden: donderdag 4 maart 2010 6:19
Aan: General Discussion: On-Topic and Off-Topic Posts
Onderwerp: would this work?
Forgive my lack of hardware knowledge...
What if I took this:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=31020161623
2&rvr_id=&crlp=1_263602_263622&UA=WVF%3F&GUID=fbd9ae461220a043
7161e4b1ffdf44f7&itemid=310201616232&ff4=263602_263622
Desoldered the female ISA connector, then soldered it to the
underside of a passive backplane. Would I have goofy
reliability problems? Would it even work?
brian
If I understand you right, you're soldering the ISA connector to the bottom
of another ISA connector.
If so, all the signals are mirrored on the ISA connector you soldered on the
backside, it woudn't work just smoke ;-)
-Rik