Imaging SCSI hard disks

Jerome Fine replies: I accept that Linux versions of E11 work very well, but I require one very special feature of the VT100 emulation: 132 character text lines under KED within RT-11 Does E11 under Linux allow this? I have tried a number of other Windows operating systems, but with the same hardware, only Windows 98 SE seems to work. I understand that Windows 95 works as well, but I did not have the correct AGP board at the time. One other aspect of the VT100 emulation is that when I use a standard PC keyboard with the 6 keys above the arrow keys, I am able to convert them to operate like the 6 EDIT keys on a VT220 keyboard (LK201). This allows me to use many of the features of the VT220 / LK201 keyboard. In addition, I have mapped the F1 - F12 PC keys into F6 - F20 for the LK201 keyboard (F14 was not possible). As a result, when I use the SL: (Single Line Editor) under RT-11, I have many extra features not available on a VT100. I also tested these features with a real DEC VT220 and the results were very satisfying. I would appreciate any help in using Linux with E11 for these 2 aspects I have just mentioned. Sincerely yours, Jerome Fine -- If you attempted to send a reply and the original e-mail address has been discontinued due a high volume of junk e-mail, then the semi-permanent e-mail address can be obtained by replacing the four characters preceding the 'at' with the four digits of the current year.