26 Jul
2012
26 Jul
'12
3:27 a.m.
On Thu, 26 Jul 2012 09:36:30 +0200
Camiel Vanderhoeven <iamcamiel at gmail.com> wrote:
I've stripped the two low corporate racks to the
chassis, and if
I can find a helping hand, I'm sure I can get them into the attic
Have a look
at the racks. Are the posts welded or is it riveted?
I had a similar problem with two DEC racks. I removed the rivets with a
drill and a chisel. There are only 28 of them. Then I put the parts
(the four posts, top and bottom) upstaris and put it back together with
M6 screws and hex-nuts. Easy to do, made transportation of the racks
much, much easier and the M6 screws hold it together just as well as
the rivets.
--
\end{Jochen}
\ref{http://www.unixag-kl.fh-kl.de/~jkunz/}