Anyone have any docs on Termiflex handheld terminals?

Hi, All, I recently picked up an item I've been looking for for quite some time, a handheld configuration "terminal" for a LeCroy 1440 HV chassis, called a "Model 1447 Local Diagnostic Controller". It's superficially like the DEC hand-held used in the field for internal RA81 diagnostics but it's not the same model. The 1447 is described in the 1440 docs, so I have the pinout (DA-15 with TxD and RxD on pins 2 and 3, plus ground and +5V on certain pins). A sticker on my 1447 indicates it's a "Termiflex" product but all I can find online are pictures and docs from the later LCD display units. This one has a 1x16 LED alpha display. Does anyone have any docs on older LED Termiflex units? Again, I have the pinout but I'm curious about the innards. Unfortunately, the 4 case latches are difficult to unlock without some magic shim tool or I'd just open mine and reverse-engineer the PCB (there are four 2mm x 8mm slots with some sort of metal barbs at the bottom that seem to need a specific tool to open - a small blade has been unhelpful so far). Pinouts (cf J3) https://prep.fnal.gov/catalog/hardware_info/lecroy/high_voltage/images/fig2… moment if TxD and RxD are +/-12V or +5V and GND but that's easy to check on the TxD line before I put anything on the RxD line. Thanks for any info. -ethan