6502 BASIC or Assembler and Intel 8271/WDC 1770 info req'd

Hi, I'm building myself a 6502-based single-board computer, with the aim of running it off a 4.8V NiMH or NiCad battery pack. But I've got a problem. I need a programming language for it. Aparrently there were many BASIC interpreters sold for the Synertek SYM-1 (aka SY-VIM-1), MOS KIM-1 and Rockwell AIM-65. Anyone know what happened to the companies that produced these? Ideally I'd like the source code for a 6502 BASIC interpreter, but binary code would be OK too. The SBC will communicate via a small LCD panel, RS232 (so I can hook it up to a "dumb terminal") and will have a hexadecimal keypad and an optional hard drive, too. Anyone care to make any suggestions (or submit some code)? BTW, I also need some info on the Intel 8271 disk controller - I've got two of these little devils and Intel's datasheet makes absolutely no sense at all. I've also got a Western Digital WD1770-PH 00-02 that I might be able to use instead. First of all, which is the better controller? The 8271 or the 1770? Also, is it possible to overclock a 1770 or an 8271 like you can a 1772? I'd love some schematics and/or some source code. I really don't fancy disassembling Acorn's 8271 DFS and Watford Electronics' 1770 DFS... Thanks. -- Phil. philpem(a)bigfoot.com http://www.philpem.f9.co.uk/