28 May
2015
28 May
'15
5:18 p.m.
On Thu, 28 May 2015, Jules Richardson wrote:
On 05/27/2015 04:18 PM, Chuck Guzis wrote:
Try these:
Schurter 0724 series:
4300.0100 - solder terminals
4300.0101 - pcb terminals
Schurter 2561 series:
6160.0001 - solder terminals
Schurter 2562 series:
6160.0002 - pcb terminals
http://www.schurter.com/Components/Connectors/Connectors-Inlets-Outlets
http://www.mouser.com/Connectors/Power-Connectors/AC-Power-Entry-Modules/_/…
[I couldn't do much more than a quick search since I'm really busy with
flood cleanup.]
Keep in mind the C5/C6 couplers are only rated for 2.5A.
Something else other list members may find interesting is the Bulgin
PX0578/63. Those are a C13 input coupler with 0.25in (6.3mm) quick connect
terminals. I'm using some of these to connect power to some really small
SeaSonic switch mode PSUs for embedded applications.
Both Bulgin and Schurter have all sorts of IEC 60320 connectors/couplers,
but the best way to find them is to look at the datasheets and not
Mouser's search. Mouser often has the terminations, mounting type, and
sometimes even the coupler type listed wrong, so I always use the
manufacturer's part number when searching.
I did a little checking today--I compared a male
163-type receptacle
with a C14 receptacle. The mounting ear holes appear to have the same
spacing; the C14 is about 3/4" thick, where the 163 (metal shell) is
about 1/2" thickness, so you'd need to enlarge the mounting holes about
1/8" on the top and bottom.
Aha, I'm not a fan of non-reversible mods if I've got an alternative.
I'm leaning toward the C5/6 connectors at the moment; I see the cables
around once in a while, but I'm not sure about the availability of
chassis-mount sockets (I expect they're generally PCB-mount).
Option 2 is to use a mounting plate with a grommet and simply have a
permanently-attached power cable - separate power cables on things are
just there to get lost anyway ;-)
I'll arrange a trip back to the site where some of the test equipment
came from though as there may be a nest of the original cables there -
the problem will be finding them, as it was a bit of a dumping ground
for ancient tech.