SP wrote:
Perhaps is a problem of the cable and terminal you are
using.
I have one DEC cable with MMJ connector, and use one VT-102
or one Compaq Portable with Kermit using VT-102 emulation to connect
with the Microvax 2000.
Just curious... Do you have in the back of the Microvax one Box with
three MMJ connectors ? This is neccesary to connect with one Serial
Terminal (someone correct me if this is a mistake)
I had a couple of VS2000 (Same box, with graohics) and routinely used
a nearly-standard PC-type RS-232 null modem cable. You have to short
two pins at the VAX side, but I do not remember which two. I found the
pinouts in some FAQ or other online.
Also, remember that on all the desktop VAXen I've run, the *printer*
port is the console. Zane, Eric, is that absolute or no?
Sorry I don't have the pinout, but IIRC, it's the same cable needed
for the MVII console.
Doc