3 Oct
2001
3 Oct
'01
12:36 a.m.
If he's done the obvious, i.e. hooking the Oki 600e to a serial port he's going
to have troubles.
If he has the parallel port spec, it MIGHT work, provided the RS model drives
all the signals as the PC does, which I'd guess it doesn't.
I've never even seen a model 12, so I don't know how accessible the driver is in
the software.
Dick
----- Original Message -----
From: "Geoff Reed" <geoffr(a)zipcon.net>
To: <classiccmp(a)classiccmp.org>
Sent: Tuesday, October 02, 2001 9:26 PM
Subject: Re: Model 12 <-> Okidata 600e
The model 12 should have a parallel port IIRC... it
may be a card-edge
style (it's been a while since i've looked at one)
At 08:56 PM 10/2/01 -0500, you wrote:
I'm trying to help a friend of a friend
interface an Okidata 600e printer
with a Radio Shack Model 12 computer. Any idea if this is possible? He
claims to have created an interface cable, but it doesn't work.
Robert Matthews