New Classic Finds and etc. (Long)

Huh? Did I miss something? We're talking about a power supply here, right? A power supply should provide the specified voltage. The power supply must be rated at *at least* the current (Amps) or power (Watts) drawn by the load, but an excess here does not hurt. Some power supplies require a minimum load in order to operate correctly, that is not likely to be an issue here. You will fry a power supply if you pull too much current from it. You cannot *provide* too much current to the load -- it draws what it wants to. You *can* provide too much voltage. --Bill ----- Original Message ----- From: "Lyos Norezel" <lyosnorezel(a)yahoo.com> To: "General Discussion: On-Topic Posts Only" <cctech(a)classiccmp.org> Sent: Sunday, January 25, 2004 9:15 PM Subject: Re: New Classic Finds and etc. (Long) wrong power rating... even if it was only 1mA off. The voltage almost never matters... as long as the power is correct. Hope this gets to u before you fry your machine.