4 Jun
2015
4 Jun
'15
8:56 p.m.
Ethan Dicks [ethan.dicks at gmail.com] wrote:
did not come with a removable cartridge so I've not been able to spin it up
Yes, one of the annoyances of the RC25 is that you can't spin it up w/o the
removable platter in place. I have only one cartridge myself, and it's probably bad.
Somebody needs to come up with a hack to spin up the Winchester part alone (hint, hint
:-)
One I've seen is to nibble a chunk out of the rim
of the cover skin (to prevent pinching) and run a BC-11-A
Unibus ribbon cable out to a BA-11 and stick any number of controllers in that
Doesn't the 725 have one of the regular bulkhead connector panels on the back? The
one with the modular screw in plates? If so, ISTR that there's a cable clamp one that
will clear a BC11 cable.
In any case, I have no need for such foolishness :-) I have a perfectly good 730 too,
with a BA11-K expander in the next rack. It works great, and that configuration (with the
730 instead of the 725) was even supported although uncommon. I should go out in the
garage and check how the UNIBUS cable is routed for you.
Besides, the cool thing (for me, at least) about the 725 was the packaging. Any
replacement drive would have to fit inside the original box to suit my taste.
The best option I've come up with is an SMD UNIBUS controller (I have just exactly
one!) and a small SMD drive. There were some small SMD drives that I think would fit
inside the 725 case. The front panel wouldn't be right, but it's better than
nothing. As you said, SCSI would be better, but I don't have a UNIBUS controller.
What I'd really like is to build a "LESI disk emulator" that could just
plug into the AZTEC controller, but as far as I've ever been able to determine, DEC
never documented LESI. Or at least none of the documentation ever escaped.
BTW, my 725 is missing the outer sheet metal skin. The previous owner apparently
didn't think it was important and discarded it. If anybody happens to have an extra
VAX-11/725 skin, I'd love to know.
Bob