12 Nov
1997
12 Nov
'97
4:57 p.m.
On Tue, 11 Nov 1997, Tony Duell wrote:
On Tue, 11 Nov 1997, Daniel A. Seagraves wrote:
Can you halt the CPU (RUN light off) from the panel?
If not, then you've
probably got grant problems.
That's it. When I push CTRL/HALT, I get BUS ERR.
Try pulling the terminator (M9302 card, I
think - anyway it's in the far left slot). If you can now halt the CPU
from the panel, you've certainly got grant problems.
Okay... You're right. I've got grant trouble.
OK. They're on the 3rd connector from the back (2
connectors behind them,
3 in front). They're the rearmost 2 pins on the righthand side (looking
from the _TOP_ of the backplane). You'll find they're linked by a little
loop of wire close to the backplane. That's what you should have cut.
What, in fact, did you cut?
I have to look later, I have work to do.