Sparcstation LX troubleshooting

Don wrote: While the advertised maximum amount of RAM is 96MB (6 x 16MB modules) you can in fact install 128MB of RAM into a Sparc LX. Two of the six slots will recognize 32MB modules (2 x 32MB + 4 x 16MB = 128MB) which is double the capacity of the IPC and IPX although, as noted by others, the IPC and IPX support the 64MB SBUS card originally intended for the Sparc 1, 1+ and 2. I can also confirm that the Classic has an on-board CG3 and the LX has an on-board CG6. The former is almost unusable and the latter is relatively decent, albeit only at 8 bits per pixel. I've got the world's most 'pimped out' (I think that's the phrase the teenagers are using) LX system gathering dust in my basement. I just don't have the heart to junk it and I can't find anyone that would put it to good use. (If that sounds like you, email me. I'm in Toronto BTW.) I've also got a RasterFlex/HR (24 bit accelerated SBUS framebuffer) with 8MB of on-board RAM if anyone is interested. Manufacturer supported drivers up to Solaris 2.51 (if memory serves) although I think it works with 2.6 and perhaps beyond. It has been a long time since I've used it. I do remember that it's fast as heck compared to Sun's anemic framebuffers. Ah, the memories... -- Golan Klinger <gklinger at gmail.com> Dark is the suede that mows like a harvest.