10 Jan
2004
10 Jan
'04
8:54 a.m.
On Fri, 9 Jan 2004 22:16:13 +0100
"Denis Juroszek" <denis(a)juroszek.de> wrote:
i hope you can help me. i found you with
www.google.de. i?m looking for a schematic of an epson hx-20 and other technical
information.
I have the complete manuals (Programming, Technical, user etc) for the
HX20. If you let me know what you need, I can let you have the information you need.
i have tree of them, but only one work corektly. the
other two don?t > start the basic interpreter an work only with the monitor. do you
have > a tip for me, where i can become information or schematics for tghe > hx-20?
Have you tried doing the CTRL-@ reset trick? HX20s have a habit of getting corrupt
memory ;) The battery might be getting a little old, too (and don't run off AC power
without a good battery, as it acts to limit the raw DC input voltages seen by the
machine)
On a related note, I was wondering if anyone had any ideas about how to transfer HX20
disks to PC. The TF-20 wrote 320K 5.25" DSDD disks. I have two 5.25" (Epson
brand) floppy drives in a TF20, but I'm not quite sure about how to hook them to a PC
floppy interface (or if it is even possible). Each drive has 4 dip switches (presumably
for A/B settings etc), but no settings documentation. The other way is to use the TF20 via
the serial port, and pretend to be an HX20.