26 Sep
2005
26 Sep
'05
7:31 p.m.
In a message dated 9/26/05 8:02:30 AM Central Daylight Time,
cctalk-request at classiccmp.org writes:
For a good example of HDPE, you need go no further
than your wastebasket or
garbage can--or the liner bag in a box of corn flakes. I've tried to
mechanically polish the stuff, but it's soft and any abrasive is easily embedded in
the surface and it tends to get "stringy" if it gets warm under the buffing
wheel.
Have you tried Dow Scrubbing bubbles bathroom cleaner and a scotch pad? Spray
the cleaner on and let it set a few minutes , spray again then use scotch
pad.
Isa