20 Jun
2003
20 Jun
'03
2:50 p.m.
I take it the red 'fault' light is not coming
on on the drives?
Just once, but it cleared.
Here's the boot seq. I was talking about:
"KA660-A V4.9, VMB 2.12
Performing normal system tests.
95..94..93..92..91..90..89..88..87..86..85..84..83..82..81..80..
79..78..77..76..75..74..73..72..71..70..69..68..67..66..65..64..
63..62..61..60.."
(stops and loops back to the beginning for ~3 minutes... then:)
"KA660-A V4.9, VMB 2.12
Performing normal system tests.
95..94..93..92..91..90..89..88..87..86..85..84..83..82..81..80..
79..78..77..76..75..74..73..72..71..70..69..68..67..66..65..64..
63..62..61..60..59..58..57..56..55..54..53..52..51..50..49..48..
47..46..45..44..43..42..41..40..39..38..37..36..35..34..33..32..
31..30..29..28..27..26..25..24..23..22..21..20..19..18..17..16..
15..14..13..12..11..10..09..08..07..06..05..04..03..
Tests completed."
(came up to temperature...perhaps?)
Wonder what test 59 is and what a failure there signified?
Does your host even show up in the SHOW DEVICE?
DSSI Node 7 (*)
Yes, like that.
Perhaps the full output of SHOW DEVICE might be
helpful.
Here:
">>>sho dev
DSSI Bus 0 Node 7 (*)
UQSSP Tape Controller 0 (774500)
-?
Ethernet Adapter
-EZA0 (08-mac..mac-F7)"
The "-?" looks wierd.
sho dssi, again, showed no tape. nothin' but controller.
thx for responding.
John A.