28 Mar
2005
28 Mar
'05
6:41 p.m.
The bootstrap wants the I/O slot number in bits 11 thru 6.
----- Original Message -----
From: "Jay West" <jwest at classiccmp.org>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
Sent: Monday, March 28, 2005 4:48 PM
Subject: Re: hp2114 basic
Tim wrote...
and got it assembled. The C version above did not
work well for me.
The C version on taurus has some problems. The perl version works
well, so
I'm echoing your experience.
Now I'm stumped on getting it bootstrapped.
Not sure where to put the tty
port number info. Does it just want a slot number?
It wants the slot number
enteres in the S register (LIA is an I/O from the
switch register). The fact they are masking to the lower six bits tells me
to set S register bits 5-0 to the select code of the tty.
Jay West