26 Mar
2015
26 Mar
'15
3:30 p.m.
Hi Mike,
Well it?s certainly nice to know the Cromemco is also another good option if I want to try
DRAM again, but I am feeling that a good SRAM card maybe a safer option, and possibly
easier for me to repair if anything goes wrong.
Thanks for your thoughts
On Mar 27, 2015, at 10:32 AM, Mike Stein <mhs.stein
at gmail.com> wrote:
FWIW I've never had any problems with Cromemco 64KZ-II DRAM cards.
m
----- Original Message ----- From: "Philip Lord" <philip at
neoncluster.com>
To: <publicmail at jwsss.com>; "General Discussion: On-Topic and Off-Topic
Posts" <cctalk at classiccmp.org>
Sent: Thursday, March 26, 2015 5:19 PM
Subject: Re: WTD: S100 Static RAM card
Hi Jim, thanks for the info.
Always good to know what people think are good cards, and what aren?t.
Cheers
On Mar 27, 2015, at 10:13 AM, Jim Stephens
<jws at jwsss.com> wrote:
On 3/26/2015 1:34 PM, Philip Lord wrote:
Hi all,
I?ve been struggling getting a 64k Dynamic RAM card back up and working in my IMSAI 8080.
In fact I?m giving up on the DRAM card in this system and have decided to start looking
for a SRAM card that can get the IMSAI up to 56k.
In terms if SRAM cards, I presently have:
2 x Problem solver RAM16 cards - both seem to be working.
2 x 8K RAM cards - both seem to be working.
Less cards generating heat, and putting stress on the old power supply is obviously best,
so I?d be looking for either:
- 1 x 16k SRAM card (for a total of 4 RAM cards (3 x 16k + 1 x 8k) in my system). A PSS
RAM16 would be preferred for sake of consistency, but obviously not crucial.
- 1 x 32k SRAM card (for a total of 3 RAM cards (1 x 32k, 1 x 16k + 1 x 8k) in my
system)
- 1 x 64k SRAM card that can have the last 8k bank turned off
I would love to hear from anyone with one of the above cards who would be willing to pass
it on.
Much thanks for your time.
Best regards
Philip
I do not have any to pass on, but in the day, you couldn't do better
than IMS 16k's I also had a Tarbell CPU with 256k of Dram, and that was the only
dynamic ram I ever had in an S100 system.
Also if you can find Compupro, I suspect it is as likely to be perfect as the IMS boards
are.
Thanks
Jim